제품 설명
Large 2000*6000mm CNC Plasma Drilling Cutting Pipe Cutting Machine with Diameter 500mm Rotary Axis
Introduction
CNC plasma cutting drilling machine has solved problem for follow-up processing for small holes after cutting plates, economic, energy conservation and environment protection, high improve the working efficiency, lowing the processing cost, has the ability of combine machining, fully effective the machine performance.
Combined the cutting and drilling two functions on one machine, can drill 2-15mm small holes which plasma cutting machine can't cut, can for less than 5mm thin steel cutting and drilling, also for 6mm or more than 6mm thickness steel center drilling and cutting.
With special drilling head can for 1-30mm diameter steel drilling, after drilling, can do the cutting works.
풍모
CNC Control system(FangLing control system)
1. LCD, English display. Has the notes of each operation button on the bottom of displayer in time, so just needs short training, then the buyer can do independent operation, more convenient and easy to use.
2. Powerful anti-interference ability, moving stable and convenient.
3. With cutting compensation function, setting the required workpiece size in computer, nesting and output, can adjust the slotting size in the control system according to needs, easy and efficient operation.
4. Memory function after power failure and break point, no matter power failure or arc breaking during cutting, all can continue go forwarder or back-off following the cutting track.
THC( Torch Height Controller)
1. With high sensitivity THC, auto adjusting the best cutting distance, ensuring the workpiece accurately cutting.
2. The torch has auto torch height controller, during cutting, the torch always keeps the same distance with the plate, extend the nozzle's life time, and get the high quality cutting effect.
3. Good anti jamming capability, stable performance
Z-axis( Double Z-axis, drilling and cutting)
1. Z-axis is lead ball screw transmission type, high speed, convenient maintenance,suitable for all kinds thickness of plates.
2. Can auto adjust the cutting distance for uneven plate, ensuring the same distance between the torch with plate, ensuring the cutting quality.
3. Special torch height controller can prevent the torch crash the plates effectively, protect the torch and long time using.
4. With anti-collision device, during the cutting, if torch crash accidentally, the machine will stop immediately, avoiding breaking the machine and thin plates is whiled away due to the cocking.
5. With infrared positioning system for cutting Z-axis
Motor & Drive
1. Adopting China famous brand stepper motor and driver, stable performance, high response speed, good anti jamming capability.
2. All the machine's signal wire is high flexible shielded wire, heat resistant, low temperature resistant, bend resistant.
3. Control signal uses 24V voltage, with famous brand switch power supply.
Machine bed part
1. The whole machine bed adopts welded steel structure and then precision-machined, whole tempering, fully eliminate welding stress, stable and reliable performance. Gantry and end beam adopts cast aluminum and then precision-machined, moving performance is good.
2. Dual driving for Y-axis, XY-axis adopts high precision linear square guide rail, Hiwin, Taiwan, good oriented, high precision. Transmission is high precision helical rack and pinion, customized by the specialized manufacturer, surface carburizing quench, stable moving and high precision.
3. Dust proof system on the gantry, effectively prevent the dust going into guide rail and rack during cutting, extend the machine life time, also make machine more beauty,
4. Special fume dust extractor,and down draft cutting table and slag storage device, create a good working environment.
Nesting Software
1. Austria FastCAM automatic programming and nesting software
2. Auto programming, parts generated and nesting softare professionally drawing and cutting control With the post processor for graphic transformation and nesting.
3. Realizing the edge-shared nested during cutting, saving time and materials.
플라즈마 전원
Adopting USA Hypertherm MAXPRO 200A plasma power supply, cutting ability 30-40mm
Rotary axis
Diameter 500mm, working length 6000mm for pipe cutting, circle pipe cut off, no need calculating pulse parameters, convenient and easy to use.
기술적 인 매개 변수
| 절단 폭 | 2000mm |
| 절단 길이 | 6000mm |
| Rotary axis | Diameter 500mm, working length 6000mm, reduction gear transmission Can for circle cylinder cut off, for square cylinder just can cut from surface, no need calculate & input pulse parameter each time. |
| Z 축 | With THC( torch height controller, Ontime, Shenzhen), |
| 제어 시스템 | FangLing( supporting cutting & drilling& rotary axis cutting, Shanghai) USB interface Offline control system Memory function after break point and power failure |
| 플라즈마 전원 | 200A, Hypertherm |
| 절단 두께 | Hole punch cutting: <=30mm Edge cutting: <= 35mm |
| 이동 속도 | 20000mm/분 |
| 절삭 속도 | Adjusted according to material's thickness |
| Drilling head | With air cylinder for drilling Z-axis up and down |
| Drilling ability | Minimum drilling hole diameter:2-3mm Maximum drilling hole diameter:20mm Maximum drilling thickness:35mm |
| Drilling speed | Constant speed, can't adjust |
| 작업대 | Tooth type cutting table |
| Guide rails | Linear square guide rail ( Hiwin, Taiwan, #20) |
| 전달 | XY-axis is with helical rack and pinion |
| 운전 시스템 | Stepper motor (86BYGH450B, Chuangwei, China) with reduction motor Stepper driver(2608,Yako, China) for XYZ-axis Rotary axis: stepper motor (110BYGH450A, Chuangwei, China), stepper motor (2811, Yako,China) |
| 윤활 시스템 | Semi-auto |
| 증기 추출기 | Exhaust fan |
| Positioning system | Infrared |
| Anti-collision system | 예 |
| 전원 | AC 380V±10%, 50/60Hz, three phases |
응용
Suitable for nonferrous metal sheet, stainless steel plate, carbon plate, aluminum plate, galvanized plate, white steel plate, titanium plate, etc materials automatic cutting.
Application: Metal processing, machine manufacturing, auto spare parts, ventilate environment protection, steel structure shipbuilding electrical product's shell processing, advertisements and signs, decoration, iron art garden, auto making, ship's electrical parts& plates cutting.
Introduction
CNC plasma cutting drilling machine has solved problem for follow-up processing for small holes after cutting plates, economic, energy conservation and environment protection, high improve the working efficiency, lowing the processing cost, has the ability of combine machining, fully effective the machine performance.
Combined the cutting and drilling two functions on one machine, can drill 2-15mm small holes which plasma cutting machine can't cut, can for less than 5mm thin steel cutting and drilling, also for 6mm or more than 6mm thickness steel center drilling and cutting.
With special drilling head can for 1-30mm diameter steel drilling, after drilling, can do the cutting works.
기본 정보
Model NO.: UG-2060P
Working Area: 2000*6000mm
Z-Axis Number: 2, One for Cutting, One for Drilling
Control System: Fangling (Cutting and Drilling)
Plasma Power Supply: Hypertherm, USA, 200A
Cutting Thickness: 30mm
Traveling Speed: 20000mm/Min
Working Table: Tooth Type Cutting Blade
Fume Extractor: Exhaust Fan
Guide Rail: Linear Square Guide Rail ( Hiwin, Taiwan, #20)
Rotary Axis: Diameter 500mm. Independent
상표 : ACCURL
운송 패키지 : 합판 케이스
Specification: 6840*2280*1790mm, 2000kgs
원산지 : 중국
HS 코드 : 8456401000
관련 상품
강철 알루미늄 관 관 cnc 플라스마 절단기 플라스마 절단기- 테이블 cnc 플라즈마 절단기 / 저비용 cnc 절단 금속 플라즈마 기계
- 모든 수출 제품 서보 모터 스마트 플라즈마 갠트리 cnc 절단기
- cnc 파이프 프로필 절단기
- 금속 절단 cnc 플라즈마 기계
- 중국 공급 업체 강판 cnc 갠트리 플라즈마 및 불꽃 절단기 플라즈마 커터
- 40x40mm에서 100x100mm / tube 플라스마 절단기에 정연한 배관을 자르기를위한 플라스마 cnc
- 테이블 갠트리 유형 cnc 불꽃 플라즈마 절단 machiner 휴대용 미니 플라즈마 커터
- 작은 5 개의 축선 물 분출 강철 절단기, 전산화 된 탁상용 물 분출 절단기
- 저렴한 비용으로 스틸 / 스테인레스 스틸 cnc 플라즈마 금속 절단 기계 / cnc 금속 플라즈마 절단
